|
Z. Naturforsch. 66a, 675 – 680
(2011)
doi:10.5560/ZNA.2011-0026
Genetic Evolutionary Approach for Cutting Forces Prediction in Hard Milling
1 Suleyman Demirel University, Faculty of Technology, 32260, Isparta, Turkey
2 Suleyman Demirel University, Faculty of Engineering & Architecture, 32260, Isparta, Turkey
Received January 10, 2011 / revised May 30, 2011
Reprint requests to: F. T.; E-mail:
fatihtaylan@sdu.edu.tr or M. C. K.; E-mail:
cengizkayacan@sdu.edu.tr
Hard milling is a very common used machining procedure in the last years. Therefore the prediction of cutting forces is important. The paper deals with this prediction using genetic evolutionary programming (GEP) approach to set mathematical expression for out cutting forces. In this study, face milling was performed using DIN1.2842 (90MnCrV8) cold work tool steel, with a hardness of 61 HRC. Experimental parameters were selected using stability measurements and simulations. In the hard milling experiments, cutting force data in a total of three axes were collected. Feed direction (Fx) and tangential direction (Fy) cutting forces generated using genetic evolutionary programming were modelled. Cutting speed and feed rate values were treated as inputs in the models, and average cutting force values as output. Mathematical expressions
were created to predict average Fx and Fy forces that can be generated in hard material milling.
Key words: Cutting Forces; Hard Material Milling; Genetic Evolutionary Programming.